N. F. de Rooij

École Polytechnique Fédérale de Lausanne — Switzerland

Engineering · Physical Sciences

33h-index2.9kcitations223works0.02yr avg
OpenAlex↗Google Scholar↗Lab page↗

Accepting Students?

No reports yet. Know if this professor is taking students?

Research Topics

Advanced MEMS and NEMS Technologies(51), Analytical Chemistry and Sensors(40), Force Microscopy Techniques and Applications(33), Microfluidic and Capillary Electrophoresis Applications(32), Mechanical and Optical Resonators(32)

Publications223 total

Tubular gas preconcentrators based on inkjet printed micro-hotplates on foil
Sensors and Actuators B Chemical·2016· 26 citedOpen Access
Inkjet Printed SnO 2 Gas Sensor on Plastic Substrate
Procedia Engineering·2015· 18 citedOpen Access
Gas Preconcentrator Made by Rolling up a Printed Hotplate on Foil
Procedia Engineering·2015· 2 citedOpen Access
MEMS-based Porous Silicon Preconcentrators Filled with Carbopack-B for Explosives Detection
Procedia Engineering·2014· 8 citedOpen Access
Printed micro-hotplate based gas sensors on flexible foil
Infoscience (Ecole Polytechnique Fédérale de Lausanne)·2013
Surface micromachined inkjet-printed MEMS micro-bridge on plastic foil
Infoscience (Ecole Polytechnique Fédérale de Lausanne)·2013Open Access
RF-TSVs COMPATIBLE WITH HARSH-ENVIRONMENT POST-PROCESSING FOR “VIA-FIRST” 3D INTEGRATION
2013
Organic Field Effect Transistors Functionalised with Odorant Binding Proteins and Fabricated on Flexible Substrates for the Detection of Volatile Organic Compounds
Molecular Genetics and Metabolism·2013
Two Dimensional Array of Piezoresistive Nanomechanical Membrane-Type Surface Stress Sensor (MSS) with Improved Sensitivity
Sensors·2012· 73 citedOpen Access
Micro-fabricated alkali vapor cells sealed at low temperatures with thin-film metallic bonding
2012Open Access
Towards wall-coated microfabricated cells: Alkali vapor-cells using indium thin-film low-temperature bonding
2012· 2 cited
Wall-coated cells for Rb atomic clocks: Study of the ripening process by double-resonance spectroscopy
2012· 1 cited
Low voltage vertical flaps arrays as optical modulating elements for reflective display and switchable gratings
Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE·2012
P1.9.5 UV-Curable Adhesive as the Low-Cost Material of Choice for Microfluidic Forensic Applications
Proceedings IMCS 2012·2012· 2 citedOpen Access
Fluorescence based biosensors, simultaneous enzyme immobilisation and micro-fabrication using SU-8 resin
Infoscience (Ecole Polytechnique Fédérale de Lausanne)·2012
Feasibility Study: Simultaneous microfabrication and enzyme encapsulation in SU-8 films for fluorescence based phenol Biosensor
Infoscience (Ecole Polytechnique Fédérale de Lausanne)·2012
A shadow-mask evaporated pyroMEMS igniter
Journal of Micromechanics and Microengineering·2011· 7 citedOpen Access
Laser-pumped double-resonance clock using a micro-fabricated cell
2011· 3 citedOpen Access
Microfabrication of free-standing micro-solid oxide fuel cells on Foturan® and silicon substrates
Infoscience (Ecole Polytechnique Fédérale de Lausanne)·2011Open Access
Design and fabrication of micro-hotplates made on a polyimide foil: electrothermal simulation and characterization to achieve power consumption in the low mW range
Journal of Micromechanics and Microengineering·2010· 50 cited
page 1 of 12Next →

Frequent Co-authors

Christian Linder(11), M. Koudelka‐Hep(8), V.P. Jaecklin(8), D. Briand(8), Juergen Brügger(6), J.-M. Moret(5), U. Staufer(5), M.-A. Grétillat(4), R.A. Buser(3), B. van der Schoot(3), Nicolas Blanc(2), P.-A. Clerc(2), Takeo Akiyama(2), Elisabeth Verpoorte(2), H. Sundgren(2), G. C. Fiaccabrino(2), J. Courbat(2), R. Vuilleumier(2), P.-F. Indermühle(2), Thomas Overstolz(2)